Install the OpenAI-TTS HACS Extension by sfortis GitHub - sfortis/openai_tts: Custom TTS component for Home Assistant. Utilizes the OpenAI speech engine or any compatible endpoint to deliver high-quality speech. Optionally offers chime and audio normalization features.Custom TTS component for Home Assistant. Utilizes the OpenAI speech engine or

Specs used for Benchmarks (both using a 1 Gbit/s connection) Times below include downloading dependancies, 500 samples, normalisation, audio subsets presets, negative datasets and the training : Ryzen 9 7945HX 16C/32T 64GB DDR5 / RTX3090FE (24GB GDDR6X VRAM) Training Time: 2 hours AMD EPYC 9575F 64c/128T 192GB DDR5 ECC

Specs used for Benchmarks: Ryzen 9 7945HX 16C/32T / 64GB DDR5 / RTX3090FE (24GB VRAM) AMD EPYC 9575F 64c/128T / 192GB DDR5 ECC / Nvidia L40S (48GB VRAM) CUDA Toolkit 13.1 CUDA Toolkit 12.1 DownloadsGet the latest feature updates to NVIDIA’s proprietary compute stack.NVIDIA Developer wget https://developer.

Just a few I have trained to test out the new Home Assistant Voice Preview Edition. Note this requires you to take control of the device in ESP home. Add the following block with your chose wakeword .json file links that are found below. micro_wake_word: id: mww microphone:

Reyt then; Filament Volumetric Flow Rates I have used/calibrated so far using Orca Elegoo Rapid PLA + = 30mm³/s (220/225) Jayo Transparent PLA = 25mm³/s (210/215) Esun PLA+ = 20mm³/s (210/215) SunLu PETG = 40mm³/s (250/255) Handy Models 2mm_walls_towerHandy Model with 2mm Walls, current

Reyt then; I prefer to block outbound access to the outside world for various devices, including 3d printers. I prefer to handle everything locally. With Elegoo Printers (neptune 4 max / giga) maybe others they call the following ntp servers on startup ntp.aliyun.com / pool.ntp.org Via a shell

Reyt then; Enable Webcam: 1. Go onto the printers fluidd web interface 2. Go into settings and then Cameras 3. Select the "Default" camera and activate it Extruder Calibration: If you prefer to do the calibration yourself or this doesn't work for you try this https:

Reyt then; In https://forge.laravel.com/ Go to your server and to the nginx templates tab Or if the site is already setup, the server, sites tab and edit files > edit nginx configuration. I would recommend selecting all with CTRL A and backing up the contents to a

Very handy if you are building servers in Bulk. Set Recipe User as Forge #!/bin/sh FILE="/home/forge/.config/composer/auth.json" /bin/cat <<EOM >$FILE { "bitbucket-oauth": {}, "github-oauth": {}, "gitlab-oauth": {}, "gitlab-token": {}, "http-basic": { "HTTP-REPO-URL"

Reyt then; Open an SSH editor and enter the printers IP (I like to use putty) These are the logins username: mks password: makerbase Follow these steps once logged in: (right click to paste in putty) 1. sudo systemctl enable webcamd 2. sudo systemctl start webcamd 3. Go onto the

Reyt then; Here is the sketch I am using with ESPHome to get my Esp32 with dual Dallas Temperature Sensors working in Home Assistant. I am using this for Fish Tanks, one sensor in the main area, another in the filter/heater area. This is based on the following guide

Reyt then; Another scan from back in the day to test out the FARO Quantum S ScanArm HD and the Peopoly Phenom large format Resin Printer. I ran out of time on this project, perhaps someone can make use of these models to create inbuilt shift lights etc. Enjoy Model

Reyt then; Here is a 3d scan of the original JCW Lower Instrument Cluster for the R50,R52,R53 Mini, cleaned up of course. Something I did for fun back in 2018 to test out a FARO Quantum S ScanArm HD and the Peopoly Phenom large format Resin Printer. A

Reyt then; Old School IDE Hard Drive Duplicator. These need a firmware floppy to be present or will not boot. Here is a backup of said floppy for future preservation. WinImage format. The virtual format is used when replacing the drive with something like a Gotek floppy to USB Emulator,